This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== MuscleReflex ====== [[reflex|Reflex]] based on muscle length, muscle velocity, muscle force, or muscle spindle sensor. Must be part of [[reflex_controller|ReflexController]]. Output excitation corresponds to ''U = //C0// + //KF[(F - F0)//]<sub>+</sub> + //KL[(L - L0)//]<sub>+</sub> + //KV[(V - V0)//]<sub>+</sub> + //KS[(S - S0)//]<sub>+</sub>'', where []<sub>+</sub> indicates a result is always >= 0, unless the corresponding allow_neg_* is set to 1. **Inherits from** [[reflex|Reflex]]. **Inherited by** [[conditional_muscle_reflex|ConditionalMuscleReflex]]. ==== Public Attributes ==== ^ Parameter ^ Type ^ Description ^ ^ source | Muscle & | Name of the source muscle (without side), append _o for opposite side, leave empty for monosynaptic reflexes (default). | ^ C0 | Real | Constant actuation added to reflex output; default = 0. | ^ KF | Real | Force feedback gain, based on normalized muscle force (F / Fmax); default = 0. | ^ F0 | Real | Force feedback offset; default = 0. | ^ allow_neg_F | bool | Allow this reflex to be negative; default = 1 (please note that you might want this to be 0 if offset is defined). | ^ KL | Real | Length feedback gain, based on normalized CE length (L / Lopt); default = 0. | ^ L0 | Real | Length feedback offset; default = 1. | ^ allow_neg_L | bool | Allow this reflex to be negative; default = 1 (please note that you might want this to be 0 if offset is defined). | ^ KV | Real | Velocity feedback gain, based on normalized CE velocity ((L / Lopt) / s); default = 0. | ^ V0 | Real | Velocity feedback offset; default = 0. | ^ allow_neg_V | bool | Allow this reflex to be negative; default = 0. | ^ KA | Real | Muscle activation feedback gain, based on normalized activation; default = 0. | ^ A0 | Real | Activation feedback offset; default = 0. | ^ allow_neg_A | bool | Allow this reflex to be negative; default = 0. | ^ KS | Real | Spindle feedback gain, based on [Prochazka 1999], p.135; default = 0. | ^ S0 | Real | Spindle feedback offset; default = 0. | ^ allow_neg_S | bool | Allow this reflex to be negative; default = 0. | ^ target | String | Name of the target actuator; use _o for actuators on the opposite side. | ^ min_control_value | Real | Minimum output for this reflex; default = -infinity. | ^ max_control_value | Real | Maximum output for this reflex; default = +infinity. | ^ delay | TimeInSeconds | Neuromuscular delay [s] used for this reflex; default = 0. | <sub>Converted from doxygen using [[https://github.com/tgeijten/dokugen|dokugen]]</sub>