This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== InterpolataryCubicSpline ====== Parameterizable interpolatory cubic spline function. **Inherits from** [[function|Function]]. ==== Public Attributes ==== ^ Parameter ^ Type ^ Description ^ ^ tangent_begin_type | String | for Catmull Rom spline, additional points before the first point and after the last point are needed to determine the tangents at those locations | ^ control_points | size_t | Number of control points in this function. | ^ control_point_y | const PropNode * | Parameter for the y value of each control point. | ^ control_point_dt | const PropNode * | Parameter for the dt (delta time [s] from previous point) value of each control point. | ^ control_point_tangent | const PropNode * | Parameter for the tangent or slope value of each control point. | ^ offset_time_node | const PropNode * | Parameter for the offset time. | ^ scale_time_node | const PropNode * | Parameter for the scale time. | ^ flat_extrapolation | bool | Flag indicating if value should stay flat after passing the last control point; default = false. | ^ zero_start | bool | Flag indicating if the initial value shall be zero. | ^ zero_end | bool | Flag indicating if the end value shall be zero. | ^ offset_time | Real | Offset timing. | ^ scale_time | Real | scale timing | ^ cyclic | bool | Flag indicating if the spline repeating itself continuously. | <sub>Converted from doxygen using [[https://github.com/tgeijten/dokugen|dokugen]]</sub>